Suzhou Oushida Hot Melt Machinery Equipment Co., Ltd.

What are the safety precautions when installing a PUR hot melt adhesive machine?

Company Profile

Suzhou Oushida Hot Melt Adhesive Machinery Equipment Co., Ltd. is a high-tech enterprise specializing in the research and development, production, sales and technical consulting of hot melt adhesive intelligent spraying equipment.

Below, Suzhou Oushida hot melt adhesive machine manufacturer will introduce you to the safety precautions during installation. Let's take a look!

1. The PUR hot melt adhesive machineneeds to be connected to the power supply by a professional electrician. The polarity-differentiated power supply must not be connected in reverse, and the wiring needs to be fixed with a special terminal.

2. When installing the pressure plate type PUR hot melt adhesive machine, a valid grounding wire must be correctly connected. Any equipment using high voltage electricity requires a grounding wire. When the grounding wire is not used, any component protected by an insulator on the PUR hot melt adhesive machinemay still form a voltage conductor and cause the risk of electric shock.

3. According to the load required by the PUR hot melt adhesive machine and its peripheral equipment, check whether the power cord and insulation protection used meet the regulations. The load of the wire must be more than 30% higher than the rated power of the PUR hot melt adhesive machine.

4. Ensure that the PUR hot melt adhesive machineoperates at the specified voltage. If the voltage used is different from the specified standard power supply, the hot melt glue machinemay be burned.

5. Ensure that the voltage connected to the PUR hot melt glue machine is in line with the regulations of the hot melt glue machine. Generally, a 5-gallon PUR hot melt glue machine uses a single-phase 220V AC voltage standard, and a 55-gallon PUR hot melt glue machine uses a 380V AC power supply. When the voltage used is too high or too low, the equipment design performance cannot be achieved, and the hot melt glue machine may also be damaged. When wiring, ensure that the power cord is correctly connected to the correct voltage power supply.

Overview of Oushida hot melt adhesive intelligent spraying equipment: