Suzhou Oushida Hot Melt Machinery Equipment Co., Ltd.

PUR hot melt adhesive machine's requirements for production environment

PUR hot melt adhesive machine's requirements for the production environment

As a special spraying equipment for PUR hot melt adhesive, the PUR hot melt adhesive machinehas its own requirements for the surrounding environment. It is electrified during use, so when installing it, avoid flammable and explosive objects or gases around it. After installation, it is best to fix it in this position and do not move it easily.

The PUR hot melt glue machineis a large-scale mechanical gluing equipment. The power cord must have a grounding wire during installation. The power of the Oushida 55-gallon PUR hot melt glue machine is 15KW, which is very large. The power cord needs a thicker copper wire to withstand the heating load, at least 10mm.

Since the curing of hot melt adhesive is relatively fast, if the PUR hot melt adhesive machine is operated in a place where the air flows quickly, the cooling and curing of the PUR hot melt adhesive will be accelerated, so the adhesive coming out of the hot melt adhesive gun will produce a wire drawing phenomenon, so the PUR hot melt adhesive machine cannot be located at the vent position when installed.

In addition, the PUR hot melt adhesive machine also has requirements for humidity, which should be less than 85%RH, avoid direct sunlight, and there should be no corrosive gases or liquids around.

PUR hot melt adhesive machine application case