Suzhou Oushida Hot Melt Machinery Equipment Co., Ltd.

Precautions for use and maintenance of Oushida hot melt adhesive coating machine

Company Profile

Suzhou Oushida Hot Melt Adhesive Machinery Equipment Co., Ltd. is a high-tech enterprise specializing in the research and development, production, sales and technical consulting of hot melt adhesive intelligent spraying equipment.

Oushida coating laminating machine

Hot melt adhesive coating machine is a kind of equipment that heats and melts hot melt adhesive that does not require solvents, does not contain water, and is 100% solid and fusible. It is coated on the substrate and then another substrate and the coated substrate are laminated together. No drying equipment is required, and the energy consumption is low: it does not contain solvents and is pollution-free. Operators will not be exposed to a large amount of formaldehyde when cleaning the residual adhesive. It is environmentally friendly and safe.

Compared with traditional solvent-based and water-soluble adhesives, the hot melt adhesive coating machine has the advantage of high efficiency, effectively solving the inherent drawbacks of traditional processes, and is an ideal production tool for the coating and laminating industry.

So what are the safety precautions when using a hot melt adhesive coating machine?

⒈ Avoid operating the hot melt adhesive coating machine around volatile and explosive raw materials or gases.

2. Do not operate the hot melt adhesive coating machine without proper protective devices, good insulators or good protective panels. When maintenance is required, professionally trained personnel are required to dismantle the machine for maintenance, and proper protective devices, good insulators or good protective panels are required for operation.

3. Avoid operating the hot melt adhesive coating machine in an environment with a temperature below 0°C and a temperature above 50°C.

4. Try to use it in an environment without fast-flowing air. Because when the hot melt adhesive nozzle assembly is exposed to fast-flowing air, the rapid cooling will affect the hot melt adhesive flow of the nozzle assembly, which is prone to wire drawing.

5. When adding hot melt adhesive, you should add it before there is at least one-third of hot melt adhesive in the hot melt adhesive barrel to avoid adding adhesive when there is no hot melt adhesive in the hot melt adhesive pot, which will affect normal production. The amount of added adhesive should not exceed 80% of the total volume of the hot melt adhesive machine.

Maintenance of hot melt adhesive coating machine

1. The disassembly and maintenance of hot melt coating machine equipment requires professional and qualified personnel.

2. When maintaining and repairing the hot melt adhesive coating machine, you must wear safety gloves, goggles and long-sleeved work clothes to avoid being burned by the high-temperature liquid hot melt adhesive or the high-temperature component surface.

3. When repairing the hot melt adhesive coating machine, the main power supply must be cut off and no power is required. In any case, do not touch the electrical or other component connections that may be exposed outside, and do not loosen them.

4. When cleaning the hot melt adhesive tank, avoid using flames or sharp hard tools to avoid scratching the Teflon non-stick coating inside the glue barrel.

5. If the air pressure or hot melt adhesive coating machine leaks, do not continue to operate the hot melt adhesive coating machine. First stop the hot melt adhesive coating machine, cut off the power supply, and reduce the operating pressure to zero before repairing.

6. When loosening or installing the pressure joint, make sure that the pressure of the pressure air source providing the hot melt adhesive coating machine has been reduced to zero.

Suzhou Oushida Hot Melt Adhesive Machinery Equipment Co., Ltd. mainly produces and sells hot melt glue machines, PUR hot melt adhesive machines, hot melt adhesive guns, hoses, hot melt adhesive dispensing machines, hot melt adhesive coating machines,hot melt adhesive laminating machines and hot melt adhesive non-standard auxiliary equipment. Widely used in sanitary products, air filters, non-woven fabrics, footwear, printing, product assembly, clothing, stickers, packaging industry, coating and laminating industry, household electronic appliance assembly, automotive interior and exterior parts assembly, woodworking furniture industry, book binding field, etc. Looking forward to your inquiry.

Overview of Oushida hot melt adhesive intelligent spraying equipment