Suzhou Oushida Hot Melt Machinery Equipment Co., Ltd.

Application sharing | Oushida hot melt adhesive machine is used in carbon paper lamination.

Company Profile

Suzhou Oushida Hot Melt Adhesive Machinery Equipment Co., Ltd. is a high-tech enterprise specializing in the research and development, production, sales and technical consulting of hot melt adhesive intelligent spraying equipment.

Carbon paper is a kind of processed paper. Its manufacturing principle is to apply a layer of "thermosensitive coating" or wax pigment on high-quality base paper. Ordinary carbon paper is made by applying a coating composed of wax, oil and colored oil-soluble dyes on the base paper at 90℃~95℃, and then cooling and aging. Carbonless copy paper has two coatings: CF layer and CB layer containing developer. The developer is a special colorless dye dissolved in non-volatile carrier oil. After 3 to 7 hours of use, it is made into micron-sized microcapsules. The impact pressure of hard writing and printing can crush the microcapsules, causing the colorless dye solution to flow out and contact the developer, producing a chemical reaction and presenting color pictures.

Oushida hot melt adhesive machine and hot melt adhesiveare used for carbon paper lamination, and hot melt adhesive has the advantages of rapid bonding, wide bonding range, repeated heating, stable performance, and low cost. Usually it only takes tens of seconds or even a few seconds from glue application to cooling and bonding, which is particularly suitable for bonding difficult-to-bond materials such as polyolefins, wax paper and carbon paper. In addition, hot melt adhesive has no solvent consumption, avoids deformation, dislocation and shrinkage of the adherend, and helps to reduce costs and improve product quality.

The application advantages of Oushida hot melt glue machine are mainly reflected in the following aspects: 

1. Efficient production: The hot melt glue machine can significantly improve production efficiency through the automatic control system. Compared with the traditional manual gluing method, automated production can greatly reduce production time and solve the problem of slow manual production. 

2. Cost saving: The hot melt glue machine can accurately control the amount of glue, avoid glue waste, and thus save costs. In addition, hot melt glue does not contain water and other solvents, and does not require a drying process. It can be naturally cooled and solidified, which greatly saves production time and energy consumption.

3. Environmentally friendly and non-toxic: As an environmentally friendly adhesive, hot melt adhesive has a solid content of nearly 100%, and does not produce any solid waste during use, which meets the strict environmental protection requirements of modern production. Compared with traditional solvent-based adhesives, the use of hot melt adhesive significantly reduces environmental pollution.

4. Easy to operate: The hot melt adhesive machine is easy to operate and maintain, which greatly reduces labor costs. The equipment usually uses modern control methods such as touch screens, making the operation more intuitive and convenient. At the same time, the equipment has a high degree of automation, which reduces manual intervention and reduces the equipment failure rate.