OSD-82A Insole hot melt adhesive

Product Description

Model	OSD - 82A
Product Name	Hot Melt Adhesive for Shoe Insoles
Applications	Mainly used as a hot melt adhesive for shoe insole positioning
Appearance	Light yellow, transparent, block - shaped
Melt Viscosity	1600 CPS at 150°C
Softening Point	74°C
Gardner Color	3 - 4
Initial Tack	＞15# copper ball
Peel Strength	＞20N/in
Toxicity	Non - toxic
Operating Temperature	160°C - 175°C
Storage	Store in a cool, ventilated, and dry place. It can be stored for 12 months
Product Features	This hot melt adhesive features high bonding strength and good high - temperature performance
Usage Instructions	Application Methods: It can be applied by spraying or roller coating. The viscosity of the adhesive during application can be adjusted by controlling the temperature. Precautions During Operation: After adding the adhesive to the hot melt adhesive tank, immediately close the tank lid to prevent contamination from foreign impurities. Cleaning Maintenance: If there is carbon deposition in the glue tank or glue tube, first clean it with ordinary paraffin or mineral oil, and then flush it with hot melt adhesive at around 135°C.