OSD-133A Hot melt adhesive for non-woven fabrics

Product Description

Model	OSD - 133A
Product Name	Hot Melt Adhesive for Non-woven Fabrics
Purpose	Mainly used as a hot melt pressure-sensitive adhesive for bonding and laminating woolen fabrics, paper products, wood products, plastics, glass products, etc
Appearance	Light yellow transparent, block-shaped
Melt Viscosity	1580 CPS at 150°C
Softening Point	68°C
Gardner Color	0 - 1
Initial Tack	> 320# copper ball
Peel Strength	> 12 N/in
Toxicity	Non-toxic
Operating Temperature	155°C - 175°C
Storage	Store in a cool, ventilated and dry place. It can be stored for 12 months
Product Features	Good initial tack. Strong holding power. No stringing. Oil resistance.
Usage Instructions	The viscosity during gluing can be adjusted by temperature. After adding material to the hot melt adhesive tank, immediately close the tank lid to prevent contamination by foreign impurities. If there is carbon deposition in the glue tank or glue tube, first clean with common paraffin or mineral oil, and then rinse with hot melt adhesive at around 120°C