OSD-113A Hot melt adhesive for plastic products

Product Description

Model	OSD - 113A
Product Name	Hot Melt Adhesive for Plastic Products
Purpose	Mainly used as a hot melt pressure-sensitive adhesive for bonding plastic foams and for bonding and laminating non-woven fabric products
Appearance	Yellow transparent, pillow-shaped
Melt Viscosity	7570 CPS at 170°C
Softening Point	85°C
Gardner Color	0 ± 1
Initial Tack	> 20# copper ball
Peel Strength	> 12 N/in
Toxicity	Non-toxic
Operating Temperature	160°C - 180°C
Storage	Store in a cool, ventilated and dry place. It can be stored for 12 months
Product Features	It has good initial tack, strong holding power, no stringing and oil resistance
Usage	The viscosity during gluing can be adjusted by temperature. After adding material to the hot melt adhesive tank, the tank cover should be closed immediately to prevent contamination by foreign impurities. If there is carbon deposition in the glue tank or glue pipe, it can be cleaned with common paraffin or mineral oil first, and then rinsed with hot melt adhesive at about 135°C