Suzhou Oushida Hot Melt Machinery Equipment Co., Ltd.

There are automatic and manual hot-melt adhesive machines on the market. Manual hot-melt adhesive machines are used by hand with spray guns, which naturally requires labor. In some industries, the production scale is relatively large. The manual hot melt adhesive machine is time-consuming and labor-intensive. The use of automatic hot glue dispenser with automatic equipment can save a lot of labor and improve production efficiency.

Hot melt adhesive machines were used in the packaging industry earlier. With the continuous increase in labor costs, fully automated equipment for automatic hot glue dispenser and automatic box sealing machines came into being and gradually replaced Artificially. Not only in the packaging industry, the bonding and filling of auto parts, the bonding of sanitary products, the bonding of medical products, the bonding and sealing of home appliances, the dispensing of cosmetics and electronics industries, etc., these are now using automation Equipment, with automatic hot melt adhesive machine

In the future, automatic hot glue dispenser will have more advantages than manual hot melt adhesive machines, because automated equipment is the future industrial trend. Ostar hot melt adhesive machine equipment is a domestic high-quality machine, constantly improve innovation and quality.

The installing steps are as follows

1. When installing the hot melt glue machine, an effective ground wire must be connected to prevent electric shock accidents;

2. Select the cross-sectional area of the power cable and pay attention to the insulation according to the power of the hot melt machine and its auxiliary equipment;

3. Pay attention to the voltage of the power supply used (220V±10%), the correct connection of the neutral line and the live line;

4. When installing the insulation pipe, avoid damage to the pipe body and surface;

5. The minimum curvature diameter of insulation pipe installation should be greater than 300mm.

Also, there are some things you should pay attention to

1. In order to prevent the insulation tube from being able to dissipate heat properly, avoid placing the insulation tube in a closed container;

2. When using a longer insulation tube, the insulation tube should be prevented from contacting the ground or the surface of a cold object, otherwise, it will cause the rubber flow to be unsmooth, or even be completely blocked;

3. The dispensing head combination is directly exposed to the air, and it should avoid the place where the air flows quickly, or do windproof treatment;

4. No objects can be placed on the automatic hot melt machine;

5. When using an automatic hot melt glue gun, it is absolutely not allowed to point the nozzle at anyone.

That's the basic introduction of our product, automatic hot glue dispenser. If you encounter any problems about anything, please feel free to send us inquiry and we will do our best to assist you to solve the issue.